TDS
SDS

ANTI GRAVEL COATING

Special elastic anti-rust coating based on high-polymer rubber and synthetic resins. Used for treating of car bodies — thresholds, spoilers, wheel arches, front and rear aprons, door bottoms and other parts. Makes car bodies life last much longer.

Protects the visible bodywork parts of your car against stone, abrasive impact of dirt and sand, petrol, oils, water and salts. Resistant to temperature changes. Reduces noise inside a car. High spreading capacity. Compatible with all kinds of paints and lacquers.

Spreading capacity (depending on coat thickness): 2.5–3.0 м2.
Drying time: 2 hours at t +20°C.

  • Remains flexible.
  • Excellent corrosion protection.
  • Very good adhesion.
  • Sound-absorbing.
  • Resistant to weather influences.

How to use

  1. Prepare the surface: remove dirt, rust, sand and degrease the surface.
    2. Shake the can for at least 2–3 min.
    3. Shake the can from time to time when using.
    4. Spray to test.
    5. Apply a thin coat at 25–30 cm distance. For the best effect make 1–3 thin coats with 3-5 min intervals.
    6. After use, clean the valve (turn the can upside down and press the nozzle until the jet discolors).

NOTE! The surfaces treated with Antigravel can be painted at least 4–5 hours later.

Optimal can and ambient temperature during use: from +10°C to +30°C.