TDS
SDS

WAX ANTI-CORROSION COATING

For long-term anticorrosive protection of the inner cavities of the vehicle body (longerons, thresholds, door housings, pillars). Penetrates deep into pores, displaces moisture, protects the surface from water and oxygen penetration.

Makes an elastic film resistant to weathering and temperature changes. The film is a reliable protection from destructive impact of moisture, salts, road reagents. Under the can cap there is a flexible special adapter that will give access to internal cavities of a car. Can be applied on painted and unpainted metal surfaces.

Spreading capacity (depending on coat thickness): 2.5–3.0 м2.
Drying time: 2 hours at t +20°C.

  • Excellent corrosion protection.
  • Resistant to weak acids and bases.
  • Good penetrating properties.
  • Resistant to weather influences.
  • Excellent adhesion.

How to use

  1. Remove loose rust and dirt from visible surfaces
  2. Before use, shake the can 2-3 min.
  3. Apply the product to the surface of hollow spaces of the car body using a special adapter.
  4. The time between the layers is 3-5 minutes.
  5. After use, clean the valve (turn the can upside down and press the nozzle until the jet discolors).
Optimal can and ambient temperature during use: from +15°C to +30°C.