TDS
SDS

Penetrating oil “Liquid Wrench”

Used for fast separation of rusty, jammed and frozen threaded and cylindrical joints. Makes assembling and disassembling easier: separates rusty bolts, screw-nuts, screws, fittings and others.

Characterized by high penetrating ability and creates a water-repellent film that protects against recurrence of rust and prevents wear. Molybdenum disulfide provides lubricating properties after the oil evaporates from the surface. 

 

  • Fast acting
  • Frees sticky parts
  • Excellent penetrating properties
  • Corrosion preventive
  • Contains molybdenum disulfide (MoS2)

How to use

  1.  To prepare the surface: clean the surface from old lubricants, dirt, dust and degrease.
  2.  Shake the can for 2–3 min.
  3.  Apply the product  at any angle on the surface at 5–10 cm distance and allow it to take effect.
  4.  Dismantling can be done after 2-3 minutes.
  5.  When separating very rusty, long ago oxidized and stuck joints, fittings, apply the lubricant twice with a 3–5 min interval. Only after this start disassembling.
Optimal can and ambient temperature during use: from +15°C to +30°C.